The TCD1304AP is a Toshiba linear CCD image sensor with a one-pixel vertical pixel and 3.648k horizontal megapixels. AERI is a stocking distributor of obsolete Toshiba parts and electronics. If you are looking for this sensor, check out the following information: The model number is TCD1304AP, which stands for Toshiba TCD1304AP Linear CCD Array.
The Toshiba tcd1304ap linear CCD array weight 6kg. Its dimensions are 33 x 30 x 7 cm. Its spectral range is between 1500nm and 3500nm, and its weight is only six grams. It also features a cooled design, which helps it remain cool. The tcd1304ap is an excellent choice for a telephoto lens.
This camera is equipped with a Sony ILX 554 B CCD image sensor and a Toshiba tcd1304ap linear CCD array. The Sony ILX511 datasheet is available in Russian. Alternatively, you can find the datasheet in Chinese. It has the same specifications as the TCD1304AP, but can be printed in a different language.
The Toshiba tcd1304ap has a spectral range of 1500nm. The detector weighs six kilograms and measures thirty-four by seven centimeters. The tcd1304ap offers a spectral range of about fifteen hundred pixels. In comparison to a CCD image sensor, the TCD1304ap has a 3648 pixel resolution.
This CCD sensor is made by Sony. It has a spectral range of 1500nm and is cooled to -35C. The tcd1304ap is a line array that has a wide spectral range. It's a great choice for imaging projects. It is an ideal choice for a digital camera.
The TCD1304ap has a spectral range of 1500nm and weighs six kilograms. The sensor is cooled to -35C and is available in two versions: the tcd1304ap has a spectrally matched array of 3548 pixels. Aside from a linear CCD, the TCD1304ap can also be used as a high-end imaging sensor.
The Toshiba TCD1304AP is a board-level line CCD camera with 3648 pixels. The TCD1304Ap is based on a single-line, 3648-pixel CCD chip. The TCD1304AP has a CMOS sensor and a DSP. A CMOS sensor is an important component of any digital camera.
The Toshiba TCD1304AP has a spectrometer. Both models are highly sensitive CCD spectrometers. This CCD camera is capable of high-resolution measurements and sensitivity in low-light conditions. It can be used for applications requiring light of low-light. Further, it can also be used for infrared (IR) spectra.
The MLX90640 Thermal Camera Breakout is a programmable device that contains a 24x32 array of infrared sensors. It returns an array of 768 infrared temperature readings over I2C. Its compact design makes it easy to integrate into your project. It has an SD card slot that can hold an Arduino sketch or other code. It can also be used to monitor the temperature of a room or an entire home.
The MLX90640 Thermal Camera Breakout is compatible with the Raspberry Pi and other open source projects. Its seven-inch field-of-view and array of infrared detectors provide high-resolution temperature maps. The MLX90640 is extremely easy to use and is compatible with the Raspberry Pi and Arduino. It requires a 3-6 V power supply and an I2C port to function. The MLX90640 Thermal Camera Breakaway is also a great addition to your Breakout Garden kit. It features six slots for the MLX90640.
MLX90640 Thermal Camera Breakout has seven IR thermal sensors that can measure temperatures from -40 to 300 degrees Celsius. Its wide range of temperature measurements allows for easy integration into your project. The MLX90640 is compatible with the Raspberry Pi computer and will work well with it. The MLX90640 has two different fields of view: 55degx35 degree and 110degx70 degree.
The MLX90640 Thermal Camera Breakout Board is a great choice for a wide range of projects. It's cheaper than most thermal cameras and can be easily used with the Raspberry Pi or Arduino. It requires a 3-6 V power supply and an I2C interface. It features an IR field of view of 55x35 degrees and an adjustable angle for up to seventy degrees.
The MLX90640 Thermal Camera Breakout is a low-cost IR camera with seventy-eight thermal sensors. Its low cost makes it ideal for low-light environments and monitoring human body temperature. The MLX90640 is compatible with many types of projects and is easy to integrate into your project. You can use it with Raspberry Pi or Arduino and it is compatible with Open-Source tools.
The MLX90640 Thermal Camera Breakout is a far infrared thermal camera with an 80x80 degree field of view. Its 24x32 IR thermal sensors can detect a range of temperatures from -40°C to 300°C. Its unique design makes it easy to use and integrate into projects. These IR cameras are compatible with a variety of Arduino and Raspberry Pi microcontrollers.
MLX90640 Thermal Camera Breakout is an infrared thermometer with a 24x32 array of IR thermal sensors. Its real-time temperature map operates at a frame rate of three to eight frames per second. The frame rate is limited by the CPU and GPU of a laptop or a desktop computer. The MLX90640 provides a large field of view with a 55degx35 degree field of view. The MLX90640 has a narrower 110degx70-degree field of view and can be integrated with a single pixel.